2 files changed, 0 insertions, 89 deletions
diff --git a/bigclown-mqtt2influxdb/files/config.yml b/bigclown-mqtt2influxdb/files/config.yml
deleted file mode 100644
index 350c85a..0000000
--- a/bigclown-mqtt2influxdb/files/config.yml
+++ /dev/null
@@ -1,67 +0,0 @@
-## Example bigclown-mqtt2influxdb configuration
-
-# MQTT configuration
-mqtt:
-  #host: 127.0.0.1
-  #port: 1883
-
-# InfluxDB configuration
-influxdb:
-  #host: 127.0.0.1
-  #port: 8086
-  #database: node
-
-# This is default configuration used to mirror all values produced by default
-# BigClown modules firmware. You might want to add your topics or drop those for
-# modules you don't own.
-points:
-  - measurement: temperature
-    topic: node/+/thermometer/+/temperature
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-      channel: $.topic[3]
-
-  - measurement: relative-humidity
-    topic: node/+/hygrometer/0:4/relative-humidity
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-
-  - measurement: illuminance
-    topic: node/+/lux-meter/0:0/illuminance
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-
-  - measurement: pressure
-    topic: node/+/barometer/0:0/pressure
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-
-  - measurement: co2
-    topic: node/+/co2-meter/-/concentration
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-
-  - measurement: voltage
-    topic: node/+/battery/+/voltage
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-
-  - measurement: button
-    topic: node/+/push-button/+/event-count
-    fields:
-      value: $.payload
-    tags:
-      id: $.topic[1]
-      channel: $.topic[3]
diff --git a/bigclown-mqtt2influxdb/files/init b/bigclown-mqtt2influxdb/files/init
deleted file mode 100644
index 04fae99..0000000
--- a/bigclown-mqtt2influxdb/files/init
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=1
-
-USE_PROCD=1
-
-PROG=/usr/bin/mqtt2influxdb
-CONF=/etc/bigclown-mqtt2influxdb.yml
-
-start_service() {
-	procd_open_instance
-	procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-5} ${respawn_retry:-5}
-	procd_set_param command "$PROG" -c "$CONF"
-	procd_set_param stdout 1
-	procd_set_param stderr 1
-	procd_close_instance
-}
-
-stop_service() {
-	service_stop "$PROG"
-}