diff options
Diffstat (limited to 'pkgs/patches-linux-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch')
| -rw-r--r-- | pkgs/patches-linux-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/pkgs/patches-linux-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch b/pkgs/patches-linux-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch new file mode 100644 index 0000000..27f94dc --- /dev/null +++ b/pkgs/patches-linux-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch @@ -0,0 +1,159 @@ +From cef08115846e581f80ff99abf7bf218da1840616 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith <ansuelsmth@gmail.com> +Date: Thu, 14 Oct 2021 00:39:18 +0200 +Subject: net: dsa: qca8k: set internal delay also for sgmii + +QCA original code report port instability and sa that SGMII also require +to set internal delay. Generalize the rgmii delay function and apply the +advised value if they are not defined in DT. + +Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/dsa/qca8k.c | 88 +++++++++++++++++++++++++++++++++---------------- + drivers/net/dsa/qca8k.h | 2 ++ + 2 files changed, 62 insertions(+), 28 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1004,6 +1004,7 @@ qca8k_parse_port_config(struct qca8k_pri + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_SGMII: + delay = 0; + + if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) +@@ -1036,8 +1037,13 @@ qca8k_parse_port_config(struct qca8k_pri + + priv->rgmii_rx_delay[cpu_port_index] = delay; + +- break; +- case PHY_INTERFACE_MODE_SGMII: ++ /* Skip sgmii parsing for rgmii* mode */ ++ if (mode == PHY_INTERFACE_MODE_RGMII || ++ mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_TXID || ++ mode == PHY_INTERFACE_MODE_RGMII_RXID) ++ break; ++ + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->sgmii_tx_clk_falling_edge = true; + +@@ -1261,12 +1267,53 @@ qca8k_setup(struct dsa_switch *ds) + } + + static void ++qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, ++ u32 reg) ++{ ++ u32 delay, val = 0; ++ int ret; ++ ++ /* Delay can be declared in 3 different way. ++ * Mode to rgmii and internal-delay standard binding defined ++ * rgmii-id or rgmii-tx/rx phy mode set. ++ * The parse logic set a delay different than 0 only when one ++ * of the 3 different way is used. In all other case delay is ++ * not enabled. With ID or TX/RXID delay is enabled and set ++ * to the default and recommended value. ++ */ ++ if (priv->rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->rgmii_tx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; ++ } ++ ++ if (priv->rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->rgmii_rx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; ++ } ++ ++ /* Set RGMII delay based on the selected values */ ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, ++ val); ++ if (ret) ++ dev_err(priv->dev, "Failed to set internal delay for CPU port%d", ++ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); ++} ++ ++static void + qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) + { + struct qca8k_priv *priv = ds->priv; + int cpu_port_index, ret; +- u32 reg, val, delay; ++ u32 reg, val; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1315,32 +1362,10 @@ qca8k_phylink_mac_config(struct dsa_swit + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: +- val = QCA8K_PORT_PAD_RGMII_EN; +- +- /* Delay can be declared in 3 different way. +- * Mode to rgmii and internal-delay standard binding defined +- * rgmii-id or rgmii-tx/rx phy mode set. +- * The parse logic set a delay different than 0 only when one +- * of the 3 different way is used. In all other case delay is +- * not enabled. With ID or TX/RXID delay is enabled and set +- * to the default and recommended value. +- */ +- if (priv->rgmii_tx_delay[cpu_port_index]) { +- delay = priv->rgmii_tx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; +- } +- +- if (priv->rgmii_rx_delay[cpu_port_index]) { +- delay = priv->rgmii_rx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; +- } ++ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); + +- /* Set RGMII delay based on the selected values */ +- qca8k_write(priv, reg, val); ++ /* Configure rgmii delay */ ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + + /* QCA8337 requires to set rgmii rx delay for all ports. + * This is enabled through PORT5_PAD_CTRL for all ports, +@@ -1411,6 +1436,13 @@ qca8k_phylink_mac_config(struct dsa_swit + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); ++ ++ /* From original code is reported port instability as SGMII also ++ * require delay set. Apply advised values here or take them from DT. ++ */ ++ if (state->interface == PHY_INTERFACE_MODE_SGMII) ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); ++ + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -39,7 +39,9 @@ + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22) ++#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) |