diff options
Diffstat (limited to 'pkgs/u-boot-add-openwrt-one.patch')
| -rw-r--r-- | pkgs/u-boot-add-openwrt-one.patch | 579 |
1 files changed, 579 insertions, 0 deletions
diff --git a/pkgs/u-boot-add-openwrt-one.patch b/pkgs/u-boot-add-openwrt-one.patch new file mode 100644 index 0000000..722f1ee --- /dev/null +++ b/pkgs/u-boot-add-openwrt-one.patch @@ -0,0 +1,579 @@ +--- /dev/null ++++ b/arch/arm/dts/openwrt-one.dts +@@ -0,0 +1,203 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2024 John Crispin <john@phrozen.org> ++ */ ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "OpenWrt One"; ++ compatible = "openwrt,one", "mediatek,mt7981"; ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ user { ++ label = "front"; ++ gpios = <&pio 0 GPIO_ACTIVE_LOW>; ++ linux,code = <BTN_0>; ++ }; ++ ++ reset { ++ label = "back"; ++ gpios = <&pio 1 GPIO_ACTIVE_LOW>; ++ linux,code = <BTN_1>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ red { ++ label = "red"; ++ gpios = <&pio 9 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ white { ++ label = "white"; ++ gpios = <&pio 13 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ green { ++ label = "green"; ++ gpios = <&pio 15 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <1>; ++ phy-mode = "gmii"; ++ phy-handle = <&phy0>; ++ ++ phy0: eth-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++}; ++ ++&pio { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-up = <MTK_PUPD_SET_R1R0_11>; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_11>; ++ }; ++ }; ++ ++ spi2_flash_pins: spi2-spi2-pins { ++ mux { ++ function = "spi"; ++ groups = "spi2", "spi2_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_00>; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_00>; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x100000 0xff00000>; ++ }; ++ }; ++ }; ++}; ++ ++&spi2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nor@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <5000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@00000 { ++ label = "bl2-nor"; ++ reg = <0x00000 0x0040000>; ++ }; ++ ++ partition@40000 { ++ label = "factory"; ++ reg = <0x40000 0x00C0000>; ++ }; ++ ++ partition@100000 { ++ label = "fip-nor"; ++ reg = <0x100000 0x0080000>; ++ }; ++ ++ partition@180000 { ++ label = "recovery"; ++ reg = <0x180000 0xc80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/configs/mt7981_openwrt-one-nor_defconfig +@@ -0,0 +1,125 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_ENV_SIZE=0x8000 ++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_RESET_BUTTON_LABEL="back" ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_SPI_BOOT=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_PREBOOT=y ++CONFIG_DEFAULT_FDT_FILE="openwrt-one" ++CONFIG_SYS_CBSIZE=512 ++CONFIG_SYS_PBSIZE=1049 ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="OpenWrt One> " ++CONFIG_SYS_MAXARGS=16 ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++# CONFIG_BOOTM_NETBSD is not set ++# CONFIG_BOOTM_PLAN9 is not set ++# CONFIG_BOOTM_RTEMS is not set ++# CONFIG_BOOTM_VXWORKS is not set ++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++# CONFIG_CMD_UNLZ4 is not set ++# CONFIG_CMD_UNZIP is not set ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/openwrt-one-nor_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_SFDP_SUPPORT=y ++CONFIG_SPI_FLASH_EON=y ++CONFIG_SPI_FLASH_GIGADEVICE=y ++CONFIG_SPI_FLASH_ISSI=y ++CONFIG_SPI_FLASH_MACRONIX=y ++CONFIG_SPI_FLASH_SPANSION=y ++CONFIG_SPI_FLASH_STMICRO=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_SPI_FLASH_XMC=y ++CONFIG_SPI_FLASH_XTX=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_UBI_SILENCE_MSG=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_UBIFS_SILENCE_MSG=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/configs/mt7981_openwrt-one-spi-nand_defconfig +@@ -0,0 +1,126 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_RESET_BUTTON_LABEL="back" ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_SPI_BOOT=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_PREBOOT=y ++CONFIG_DEFAULT_FDT_FILE="openwrt-one" ++CONFIG_SYS_CBSIZE=512 ++CONFIG_SYS_PBSIZE=1049 ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="OpenWrt One> " ++CONFIG_SYS_MAXARGS=16 ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++# CONFIG_BOOTM_NETBSD is not set ++# CONFIG_BOOTM_PLAN9 is not set ++# CONFIG_BOOTM_RTEMS is not set ++# CONFIG_BOOTM_VXWORKS is not set ++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++# CONFIG_CMD_UNLZ4 is not set ++# CONFIG_CMD_UNZIP is not set ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/openwrt-one-spi-nand_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_SFDP_SUPPORT=y ++CONFIG_SPI_FLASH_EON=y ++CONFIG_SPI_FLASH_GIGADEVICE=y ++CONFIG_SPI_FLASH_ISSI=y ++CONFIG_SPI_FLASH_MACRONIX=y ++CONFIG_SPI_FLASH_SPANSION=y ++CONFIG_SPI_FLASH_STMICRO=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_SPI_FLASH_XMC=y ++CONFIG_SPI_FLASH_XTX=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/defenvs/openwrt-one-nor_env +@@ -0,0 +1,48 @@ ++ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory ++bl2_mtd_write=mtd erase bl2-nor && mtd write bl2-nor $loadaddr 0x0 0x40000 ++bl2_tftp_write=tftpboot $loadaddr $bootfile_bl2_nor && run bl2_mtd_write ++bootcmd=run check_button ; run led_start ; mtd read recovery ${loadaddr} ; bootm ; run led_loop_error ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb ++bootfile_bl2_nor=openwrt-mediatek-filogic-openwrt_one-nor-preloader.bin ++bootfile_fip_nor=openwrt-mediatek-filogic-openwrt_one-nor-bl31-uboot.fip ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run bootcmd ++bootmenu_1=Boot system via TFTP.=run tftp_boot ; run bootmenu_confirm_return ++bootmenu_2=[31mUnlock NOR. (Make sure the NOR/WP jumper is populated)[0m=sf probe 1:0 && sf protect unlock 0x0 0x1000000 ; run bootmenu_confirm_return ++bootmenu_3=[31mLoad BL31+U-Boot FIP via TFTP then write to NOR.[0m=run fip_tftp_write ; run bootmenu_confirm_return ++bootmenu_4=[31mLoad BL2 preloader via TFTP then write to NOR.[0m=run bl2_tftp_write ; run bootmenu_confirm_return ++bootmenu_5=[31mLoad recovery system via TFTP then write to NOR.[0m=run tftp_write ; run bootmenu_confirm_return ++bootmenu_6=[31mLock NOR. (Remove jumper afterwards)[0m=sf probe 1:0 && sf protect lock 0x0 0x1000000 ; run bootmenu_confirm_return ++bootmenu_7=Reboot.=reset ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SPI-NOR][0m ++check_button=if button front ; then run usb_recovery ; run led_loop_error ; fi ++fip_mtd_write=mtd erase fip-nor && mtd write fip-nor $loadaddr ++fip_tftp_write=tftpboot $loadaddr $bootfile_fip_nor && run fip_mtd_write ++ipaddr=192.168.11.11 ++led_done=led green off ; led white on ++led_loop_done=led white off ; led green on ; echo done ; while true ; do sleep 1 ; done ++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done ++led_boot=led green on ; led white on ; led red on ++led_start=led green off ; led red off; led white on ++loadaddr=0x46000000 ++preboot=run led_boot ++recoverfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin ++recoverfile_ubi=openwrt-mediatek-filogic-openwrt_one-factory.ubi ++recovery_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000; do mtd write bl2 $loadaddr $offset 0x40000 ; done ++recovery_write_ubi=mtd erase ubi && mtd write ubi $loadaddr 0 ${filesize} ++serverip=192.168.11.23 ++tftp_boot=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++tftp_write=run led_start ; tftpboot $loadaddr $bootfile && mtd erase recovery 0x0 ${filesize} && mtd write recovery $loadaddr 0x0 ${filesize} ++usb_pgood_delay=4000 ++usb_recovery=run led_start ; usb start && run usb_recovery_bl2 && run usb_recovery_ubi && run led_loop_done ++usb_recovery_bl2=fatload usb 0:1 ${loadaddr} ${recoverfile_bl2} && run recovery_write_bl2 ++usb_recovery_ubi=fatload usb 0:1 ${loadaddr} ${recoverfile_ubi} && run recovery_write_ubi ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu ++_init_env=setenv _init_env ; echo Initialize Env ; run ubi_create_env ; saveenv ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m" +--- /dev/null ++++ b/defenvs/openwrt-one-spi-nand_env +@@ -0,0 +1,62 @@ ++ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory ++ipaddr=192.168.11.11 ++serverip=192.168.11.23 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=run check_buttons ; run led_start ; run boot_calibration ; run boot_production ; run boot_recovery ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb ++bootfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-openwrt_one-snand-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-openwrt_one-squashfs-sysupgrade.itb ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; run led_boot ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SPI-NAND][0m ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_default=run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever ++boot_calibration=ubi read $loadaddr calibration && bootm $loadaddr#$bootconf ++boot_production=led white on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led white off ++boot_recovery=led green on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led green off ++boot_tftp=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_forever=led green off ; led white off ; led red on ; while true ; do run boot_tftp_recovery ; led red off ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi ++led_boot=led green on ; led white on ; led red on ++led_done=led green on ; led white off ; led red off ++led_loop_done=led white off ; led green on ; echo done ; while true ; do sleep 1 ; done ++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done ++led_start=led white on ; led green off ; led red off ++preboot=run led_boot ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data ++snand_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000 0xc0000 ; do mtd write bl2 $loadaddr $offset 0x40000 ; done ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++usb_pgood_delay=4000 ++usb_recover=run led_start ; usb start && run usb_recover_production && run led_loop_done ++usb_recover_production=fatload usb 0:1 ${loadaddr} ${bootfile_upg} && iminfo $loadaddr && run ubi_write_production ++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m" |