diff options
| -rw-r--r-- | devShells/c.nix | 26 | ||||
| -rw-r--r-- | flake.lock | 52 | ||||
| -rw-r--r-- | nixos/configurations/lipwig.nix | 16 | ||||
| -rw-r--r-- | nixos/configurations/zd-mox.nix | 126 | ||||
| -rw-r--r-- | nixos/modules/desktop.nix | 8 | ||||
| -rw-r--r-- | nixos/modules/develop.nix | 3 | ||||
| -rw-r--r-- | nixos/modules/hosts.nix | 17 | ||||
| -rw-r--r-- | nixos/modules/packages.nix | 1 | ||||
| -rw-r--r-- | nixos/modules/wifi-zd.nix | 137 | ||||
| -rw-r--r-- | pkgs/default.nix | 28 | ||||
| -rw-r--r-- | pkgs/mtk-arm-trusted-firmware/default.nix | 64 | ||||
| -rw-r--r-- | pkgs/u-boot-add-openwrt-one.patch | 579 |
12 files changed, 997 insertions, 60 deletions
diff --git a/devShells/c.nix b/devShells/c.nix index 5798129..9a2db98 100644 --- a/devShells/c.nix +++ b/devShells/c.nix @@ -46,22 +46,16 @@ pkgs.mkShell { libffi.dev # Qt - #qt6.qttools - #qt6.qtbase - #qt6.qttranslations - #qt6.qtserialport - #qt6.qtwebsockets - #qt6.qtcharts - #qt6.qtsvg - #qt6.qtnetworkauth - #qt6.qtwayland - #qt6.wrapQtAppsHook - libsForQt5.qtbase - libsForQt5.qttranslations - libsForQt5.qtserialport - libsForQt5.qtwebsockets - libsForQt5.qtcharts - libsForQt5.qtwayland + qt6.qttools + qt6.qtbase + qt6.qttranslations + qt6.qtserialport + qt6.qtwebsockets + qt6.qtcharts + qt6.qtsvg + qt6.qtnetworkauth + qt6.qtwayland + qt6.wrapQtAppsHook ]; meta.platforms = pkgs.lib.platforms.linux; } @@ -8,11 +8,11 @@ "systems": "systems" }, "locked": { - "lastModified": 1747575206, - "narHash": "sha256-NwmAFuDUO/PFcgaGGr4j3ozG9Pe5hZ/ogitWhY+D81k=", + "lastModified": 1750173260, + "narHash": "sha256-9P1FziAwl5+3edkfFcr5HeGtQUtrSdk/MksX39GieoA=", "owner": "ryantm", "repo": "agenix", - "rev": "4835b1dc898959d8547a871ef484930675cb47f1", + "rev": "531beac616433bac6f9e2a19feb8e99a22a66baf", "type": "github" }, "original": { @@ -150,11 +150,11 @@ }, "nixos-hardware": { "locked": { - "lastModified": 1747723695, - "narHash": "sha256-lSXzv33yv1O9r9Ai1MtYFDX3OKhWsZMn/5FFb4Rni/k=", + "lastModified": 1751432711, + "narHash": "sha256-136MeWtckSHTN9Z2WRNRdZ8oRP3vyx3L8UxeBYE+J9w=", "owner": "NixOS", "repo": "nixos-hardware", - "rev": "6ac6ec6fcb410e15a60ef5ec94b8a2b35b5dd282", + "rev": "497ae1357f1ac97f1aea31a4cb74ad0d534ef41f", "type": "github" }, "original": { @@ -212,11 +212,11 @@ }, "nixpkgs_3": { "locked": { - "lastModified": 1747728033, - "narHash": "sha256-NnXFQu7g4LnvPIPfJmBuZF7LFy/fey2g2+LCzjQhTUk=", + "lastModified": 1751382304, + "narHash": "sha256-p+UruOjULI5lV16FkBqkzqgFasLqfx0bihLBeFHiZAs=", "owner": "NixOS", "repo": "nixpkgs", - "rev": "2f9173bde1d3fbf1ad26ff6d52f952f9e9da52ea", + "rev": "d31a91c9b3bee464d054633d5f8b84e17a637862", "type": "github" }, "original": { @@ -314,11 +314,11 @@ }, "personal-secret": { "locked": { - "lastModified": 1744696740, - "narHash": "sha256-9QtdTBv3WKr0KOetNwE3EavPiPy4DASsWUTyyPW+rsM=", + "lastModified": 1750422364, + "narHash": "sha256-+ok+HVwcAonP0QZXIvcH2Bc0L/EmZlXjkFhLOPMuNxM=", "ref": "refs/heads/master", - "rev": "e4173c5ba223ce36d3abb1b4ea830596c9cdc1f6", - "revCount": 131, + "rev": "a3d3d5200b06cd689be0b66b53faf43ed3ae1799", + "revCount": 134, "type": "git", "url": "ssh://git@cynerd.cz/nixos-personal-secret" }, @@ -333,11 +333,11 @@ "nixpkgs": "nixpkgs_7" }, "locked": { - "lastModified": 1747756733, - "narHash": "sha256-+9cnxYoMnYt+r90GedAwU8NA+jOEWcaFIIAftkuKNq8=", + "lastModified": 1750069731, + "narHash": "sha256-d6r5QBHyNi09R+unERWptDrWgJ20eQOc6CwqzQcpBEI=", "owner": "silicon-heaven", "repo": "pyshv", - "rev": "d77c7236220dd6b81f68930217c448003b273356", + "rev": "9fda9d67f28f68d9ca5538c0644705b5bde16d30", "type": "gitlab" }, "original": { @@ -368,11 +368,11 @@ "nixpkgs": "nixpkgs_5" }, "locked": { - "lastModified": 1731939821, - "narHash": "sha256-SLJu/sI/wusXwc3Gjxe/lCXAawLvQpQ6h8IyglB6rBg=", + "lastModified": 1749023940, + "narHash": "sha256-NI3mu/4w7s86ONrr389rwc65/st9oWng0+M+1o6WIso=", "ref": "refs/heads/master", - "rev": "00c2d83c62603a13f54c5037f08d43591a29d6fb", - "revCount": 115, + "rev": "24654405e2da7cda14dfa5744357f33b6be730c6", + "revCount": 116, "type": "git", "url": "https://git.cynerd.cz/shellrc" }, @@ -386,11 +386,11 @@ "pyshv": "pyshv" }, "locked": { - "lastModified": 1747810528, - "narHash": "sha256-wv2ADi0yE+12UTg2dBJMxbol6mWynhwF0yJbuv5P6c8=", + "lastModified": 1750864772, + "narHash": "sha256-GZYU7gECcMahEcZrrR6Uxb88RbuL3470tMt3qPVHbXk=", "owner": "silicon-heaven", "repo": "shvcli", - "rev": "e4f730f80fa7ebde2e626a53ce487bfd349769e3", + "rev": "6a09013fbc2056619d611b13f824629d4d8dff2d", "type": "github" }, "original": { @@ -500,11 +500,11 @@ }, "vpsadminos": { "locked": { - "lastModified": 1747760341, - "narHash": "sha256-BN4upeoCsfgcyZrGju++RufU5xiFlYihTRdgHAKK6iw=", + "lastModified": 1751311163, + "narHash": "sha256-Mb3Cf9QozjuvMZj2bWLgJhuEylINdCJBtPsaNFii3L0=", "owner": "vpsfreecz", "repo": "vpsadminos", - "rev": "358134e4630929618d9befc350e110d04c085f42", + "rev": "c9fdf905af72db7297e9eb9b47d54255aec993ba", "type": "github" }, "original": { diff --git a/nixos/configurations/lipwig.nix b/nixos/configurations/lipwig.nix index 5855b6d..ab61898 100644 --- a/nixos/configurations/lipwig.nix +++ b/nixos/configurations/lipwig.nix @@ -245,6 +245,7 @@ forms groupfolders impersonate + maps memories notes onlyoffice @@ -255,15 +256,15 @@ twofactor_webauthn ; # Additional modules can be fetched with: - # NEXTCLOUD_VERSIONS=30 nix run nixpkgs#nc4nix -- -apps "passwords,money,integration_github,integration_gitlab" + # NEXTCLOUD_VERSIONS=31 nix run nixpkgs#nc4nix -- -apps "passwords,money,integration_github,integration_gitlab" integration_github = pkgs.fetchNextcloudApp { - url = "https://github.com/nextcloud-releases/integration_github/releases/download/v3.1.1/integration_github-v3.1.1.tar.gz"; - hash = "sha256-nm463H33WyXTJkb7+OSsunARNuSl5nc3uGClgwkVvhM="; + url = "https://github.com/nextcloud-releases/integration_github/releases/download/v3.2.1/integration_github-v3.2.1.tar.gz"; + hash = "sha256-iBWphFaXmQHNxgoi9qkfV7vCTChwtk6yg0aVr9Lhn4c="; license = "agpl3Plus"; }; integration_gitlab = pkgs.fetchNextcloudApp { - url = "https://github.com/nextcloud-releases/integration_gitlab/releases/download/v3.1.2/integration_gitlab-v3.1.2.tar.gz"; - hash = "sha256-nCH0DqYmr4T856sOU5PhSK6WAHIF9mnYThgytxEbkNA="; + url = "https://github.com/nextcloud-releases/integration_gitlab/releases/download/v3.2.0/integration_gitlab-v3.2.0.tar.gz"; + hash = "sha256-BDDuqQIDV3pn1mYutjA7Z3L2nib2wW6DlZgyqU46f8Q="; license = "agpl3Plus"; }; money = pkgs.fetchNextcloudApp { @@ -276,11 +277,6 @@ hash = "sha256-v4IVpqbTN3TKORESFX+sJsiSrLkUc0b5Stj8CmznSIw="; license = "agpl3Plus"; }; - maps = pkgs.fetchNextcloudApp { - url = "https://github.com/nextcloud/maps/releases/download/v1.6.0-3-nightly/maps-1.6.0-3-nightly.tar.gz"; - hash = "sha256-E0S/CwXyye19lcuiONEQCyHJqlL0ZG1A9Q7oOTEZH1g="; - license = "agpl3Plus"; - }; }; }; # OnlyOffice ############################################################### diff --git a/nixos/configurations/zd-mox.nix b/nixos/configurations/zd-mox.nix new file mode 100644 index 0000000..07da891 --- /dev/null +++ b/nixos/configurations/zd-mox.nix @@ -0,0 +1,126 @@ +{config, ...}: let + hosts = config.cynerd.hosts.zd; +in { + system.stateVersion = "25.05"; + turris.board = "mox"; + deploy = { + enable = true; + ssh.host = "zd.cynerd.cz"; + }; + + cynerd = { + router = { + enable = true; + wan = "pppoe-wan"; + lanIP = hosts.mox; + staticLeases = { + "4c:d5:77:0d:85:d9" = hosts.binky; + }; + }; + wifiAP.zd = { + enable = false; + qca988x = { + interface = "wlp1s0"; + bssids = config.secrets.wifiMacs.zd-mox.qca988x; + channel = 36; + }; + }; + wireguard = true; + monitoring.speedtest = true; + }; + + services = { + journald.extraConfig = '' + SystemMaxUse=512M + ''; + + btrfs.autoScrub = { + enable = true; + fileSystems = ["/"]; + }; + + fail2ban = { + enable = true; + ignoreIP = ["10.8.0.0/24" "10.8.1.0/24" "10.8.2.0/24"]; + }; + }; + + networking.useDHCP = false; + systemd.network = { + netdevs = { + "end2.848" = { + netdevConfig = { + Kind = "vlan"; + Name = "end2.848"; + }; + vlanConfig.Id = 848; + }; + }; + networks = { + "end2" = { + matchConfig.Name = "end2"; + networkConfig.VLAN = ["end2.848"]; + }; + "end2.848" = { + matchConfig.Name = "end2.848"; + networkConfig.BindCarrier = "end2"; + }; + "pppoe-wan" = { + matchConfig.Name = "pppoe-wan"; + networkConfig = { + BindCarrier = "end2.848"; + DHCP = "ipv6"; + IPv6AcceptRA = "no"; + DHCPPrefixDelegation = "yes"; + #DNS = ["84.19.64.3" "84.19.64.4" "1.1.1.1"]; + DNS = "1.1.1.1"; + }; + dhcpV6Config = { + PrefixDelegationHint = "::/56"; + UseDNS = "no"; + }; + dhcpPrefixDelegationConfig = { + UplinkInterface = ":self"; + SubnetId = 0; + Announce = "no"; + }; + linkConfig.RequiredForOnline = "routable"; + }; + "lan-brlan" = { + matchConfig.Name = "lan*"; + networkConfig.Bridge = "brlan"; + bridgeVLANs = [ + { + EgressUntagged = 1; + PVID = 1; + } + {VLAN = 2;} + ]; + }; + }; + }; + + services.pppd = { + enable = true; + peers."wan".config = '' + plugin pppoe.so end2.848 + ifname pppoe-wan + lcp-echo-interval 1 + lcp-echo-failure 5 + lcp-echo-adaptive + defaultroute + defaultroute6 + maxfail 1 + # user and password added in secrets + ''; + }; + systemd.services."pppd-wan" = { + after = ["sys-subsystem-net-devices-end2.848.device"]; + partOf = ["systemd-networkd.service"]; + }; + # TODO limit NSS clamping to just pppoe-wan + networking.firewall.extraForwardRules = '' + tcp flags syn tcp option maxseg size set rt mtu comment "Needed for PPPoE to fix IPv4" + iifname {"home", "wg"} oifname {"home", "wg"} accept + ''; +} diff --git a/nixos/modules/desktop.nix b/nixos/modules/desktop.nix index 06c8215..92e5b42 100644 --- a/nixos/modules/desktop.nix +++ b/nixos/modules/desktop.nix @@ -81,13 +81,19 @@ in { ])) chromium + tangram ferdium signal-desktop - libreoffice mupdf zathura pdfgrep + libreoffice-qt6-fresh + hunspell + hunspellDicts.en_US-large + hunspellDicts.en_GB-large + hunspellDicts.cs_CZ + xdg-utils xdg-launch mesa-demos diff --git a/nixos/modules/develop.nix b/nixos/modules/develop.nix index 6444473..4973a92 100644 --- a/nixos/modules/develop.nix +++ b/nixos/modules/develop.nix @@ -112,6 +112,9 @@ in { pylxd selenium + + pyvisa + pyvisa-py ])) ruff geckodriver diff --git a/nixos/modules/hosts.nix b/nixos/modules/hosts.nix index 4b358b8..5604792 100644 --- a/nixos/modules/hosts.nix +++ b/nixos/modules/hosts.nix @@ -19,7 +19,7 @@ in { default = true; description = "Use my personal static hosts"; }; - vpn = staticZoneOption; + zd = staticZoneOption; wg = staticZoneOption; spt = staticZoneOption; adm = staticZoneOption; @@ -28,9 +28,10 @@ in { config = { cynerd.hosts = { - vpn = { - "lipwig" = "10.8.0.1"; - "adm-omnia" = "10.8.0.51"; + zd = { + "mox" = "10.8.0.1"; + # Portable + "binky" = "10.8.0.63"; }; wg = { "lipwig" = "10.8.1.1"; @@ -40,6 +41,7 @@ in { # Endpoints "spt-omnia" = "10.8.1.50"; "adm-omnia" = "10.8.1.51"; + "zd-mox" = "10.8.1.52"; # Endpoints without routing "dean" = "10.8.1.59"; }; @@ -72,15 +74,16 @@ in { }; networking.hosts = mkIf cnf.enable { - # VPN - "${cnf.vpn.lipwig}" = ["lipwig.vpn"]; - "${cnf.vpn.adm-omnia}" = ["adm.vpn"]; + # Zd + "${cnf.zd.mox}" = ["mox.zd"]; + "${cnf.zd.binky}" = ["binky.zd"]; # Wireguard "${cnf.wg.lipwig}" = ["lipwig.wg"]; "${cnf.wg.binky}" = ["binky.wg"]; "${cnf.wg.android}" = ["android.wg"]; "${cnf.wg.spt-omnia}" = ["spt.wg"]; "${cnf.wg.adm-omnia}" = ["adm.wg"]; + "${cnf.wg.zd-mox}" = ["zd.wg"]; "${cnf.wg.dean}" = ["dean" "dean.wg"]; # Spt "${cnf.spt.omnia}" = ["omnia.spt"]; diff --git a/nixos/modules/packages.nix b/nixos/modules/packages.nix index 155d8a5..c41e491 100644 --- a/nixos/modules/packages.nix +++ b/nixos/modules/packages.nix @@ -47,6 +47,7 @@ in { tree lsof strace + ripgrep sourceHighlight # Colors for less unrar diff --git a/nixos/modules/wifi-zd.nix b/nixos/modules/wifi-zd.nix new file mode 100644 index 0000000..107fdf4 --- /dev/null +++ b/nixos/modules/wifi-zd.nix @@ -0,0 +1,137 @@ +{ + config, + lib, + ... +}: let + inherit (lib) mkOption mkEnableOption types mkIf mkForce mkMerge hostapd elemAt; + cnf = config.cynerd.wifiAP.zd; + + wifi-networks = name: let + is2g = cnf."${name}".channel <= 14; + in { + "${cnf."${name}".interface}" = { + bssid = elemAt cnf."${name}".bssids 0; + ssid = "UNas${ + if is2g + then "" + else "5" + }"; + authentication = { + mode = "wpa2-sha256"; + wpaPasswordFile = "/run/secrets/hostapd-UNas.pass"; + }; + settings = mkIf is2g { + ieee80211w = 0; + wpa_key_mgmt = mkForce "WPA-PSK"; # force use without sha256 + }; + }; + "${cnf."${name}".interface}.guest" = { + bssid = elemAt cnf."${name}".bssids 1; + ssid = "Koci"; + authentication = { + mode = "wpa2-sha256"; + wpaPasswordFile = "/run/secrets/hostapd-Koci.pass"; + }; + }; + }; + + net-networks = name: { + "lan-${cnf."${name}".interface}" = { + matchConfig = { + Name = cnf."${name}".interface; + WLANInterfaceType = "ap"; + }; + networkConfig.Bridge = "brlan"; + bridgeVLANs = [ + { + EgressUntagged = 1; + PVID = 1; + } + ]; + }; + "lan-${cnf."${name}".interface}-guest" = { + matchConfig.Name = "${cnf."${name}".interface}.guest"; + networkConfig.Bridge = "brlan"; + bridgeVLANs = [ + { + EgressUntagged = 2; + PVID = 2; + } + ]; + }; + }; + + wOptions = card: channelDefault: { + interface = mkOption { + type = with types; nullOr str; + default = null; + description = "Specify interface for ${card}"; + }; + bssids = mkOption { + type = with types; listOf str; + default = []; + description = "BSSIDs for networks."; + }; + channel = mkOption { + type = types.ints.positive; + default = channelDefault; + description = "Channel to be used for ${card}"; + }; + }; +in { + options = { + cynerd.wifiAP.zd = { + enable = mkEnableOption "Enable Wi-Fi Access Point support"; + ar9287 = wOptions "Qualcom Atheros AR9287" 7; + qca988x = wOptions "Qualcom Atheros QCA988x" 36; + }; + }; + + config = mkIf cnf.enable { + # TODO regdom doesn't work for some reason + boot.extraModprobeConfig = '' + options cfg80211 ieee80211_regdom="CZ" + ''; + services.hostapd = { + enable = true; + radios = mkMerge [ + (mkIf (cnf.ar9287.interface != null) { + "${cnf.ar9287.interface}" = { + inherit (cnf.ar9287) channel; + countryCode = "CZ"; + wifi4 = { + enable = true; + inherit (hostapd.qualcomAtherosAR9287.wifi4) capabilities; + }; + networks = wifi-networks "ar9287"; + }; + }) + (mkIf (cnf.qca988x.interface != null) { + "${cnf.qca988x.interface}" = let + is2g = cnf.qca988x.channel <= 14; + in { + inherit (cnf.qca988x) channel; + countryCode = "CZ"; + band = + if is2g + then "2g" + else "5g"; + wifi4 = { + enable = true; + inherit (hostapd.qualcomAtherosQCA988x.wifi4) capabilities; + }; + wifi5 = { + enable = !is2g; + inherit (hostapd.qualcomAtherosQCA988x.wifi5) capabilities; + }; + networks = wifi-networks "qca988x"; + }; + }) + ]; + }; + systemd.network.networks = mkMerge [ + (mkIf (cnf.ar9287.interface != null) (net-networks "ar9287")) + (mkIf (cnf.qca988x.interface != null) (net-networks "qca988x")) + ]; + }; +} diff --git a/pkgs/default.nix b/pkgs/default.nix index 82bd1a8..78c142c 100644 --- a/pkgs/default.nix +++ b/pkgs/default.nix @@ -34,6 +34,34 @@ final: prev: { meta = oldAttrs.meta // {broken = false;}; }); + # OpenWrt One + armTrustedFirmwareMT7981 = final.callPackage ./mtk-arm-trusted-firmware rec { + extraMakeFlags = ["BOOT_DEVICE=spim-nand" "DRAM_USE_DDR4=1" "bl2" "bl31"]; + platform = "mt7981"; + extraMeta.platforms = ["aarch64-linux"]; + filesToInstall = ["build/${platform}/release/bl2.bin" "build/${platform}/release/bl31.bin"]; + }; + ubootOpenWrtOne = + (final.buildUBoot { + version = "2025.04"; + src = final.fetchurl { + url = "https://ftp.denx.de/pub/u-boot/u-boot-2025.04.tar.bz2"; + hash = "sha256-Q5077ylu/9VBML5qcxxbEYvn/d1/zGY8y8X7GClNhxg="; + }; + defconfig = "mt7981_openwrt-one-spi-nand_defconfig"; + extraMeta.platforms = ["aarch64-linux"]; + BL31 = "${final.armTrustedFirmwareMT7981}/bl31.elf"; + filesToInstall = ["u-boot.bin"]; + extraPatches = [./u-boot-add-openwrt-one.patch]; + extraConfig = '' + CONFIG_FS_BTRFS=y + CONFIG_CMD_BTRFS=y + CONFIG_BOARD_LATE_INIT=n + ''; + }).overrideAttrs (oldAttrs: { + nativeBuildInputs = [final.buildPackages.unixtools.xxd] ++ oldAttrs.nativeBuildInputs; + }); + # nixpkgs patches zigbee2mqtt = prev.zigbee2mqtt.overrideAttrs { npmInstallFlags = ["--no-optional"]; # Fix cross build diff --git a/pkgs/mtk-arm-trusted-firmware/default.nix b/pkgs/mtk-arm-trusted-firmware/default.nix new file mode 100644 index 0000000..44fbf64 --- /dev/null +++ b/pkgs/mtk-arm-trusted-firmware/default.nix @@ -0,0 +1,64 @@ +{ + lib, + stdenv, + fetchFromGitHub, + buildPackages, + openssl, + dtc, + filesToInstall, + platform ? null, + extraMakeFlags ? [], + extraMeta ? {}, +}: +stdenv.mkDerivation { + pname = "arm-trusted-firmware${lib.optionalString (platform != null) "-${platform}"}"; + version = "2025.02.12"; + + src = fetchFromGitHub { + owner = "mtk-openwrt"; + repo = "arm-trusted-firmware"; + rev = "e090770684e775711a624e68e0b28112227a4c38"; + hash = "sha256-VI5OB2nWdXUjkSuUXl/0yQN+/aJp9Jkt+hy7DlL+PMg="; + }; + + depsBuildBuild = [buildPackages.stdenv.cc]; + nativeBuildInputs = [dtc]; + buildInputs = [openssl]; + + makeFlags = + [ + "HOSTCC=$(CC_FOR_BUILD)" + "CROSS_COMPILE=${stdenv.cc.targetPrefix}" + # Make the new toolchain guessing (from 2.11+) happy + "CC=${stdenv.cc.targetPrefix}cc" + "LD=${stdenv.cc.targetPrefix}cc" + "AS=${stdenv.cc.targetPrefix}cc" + "OC=${stdenv.cc.targetPrefix}objcopy" + "OD=${stdenv.cc.targetPrefix}objdump" + # Passing OpenSSL path according to docs/design/trusted-board-boot-build.rst + "OPENSSL_DIR=${openssl}" + ] + ++ (lib.optional (platform != null) "PLAT=${platform}") + ++ extraMakeFlags; + + installPhase = '' + runHook preInstall + + mkdir -p $out + cp ${lib.concatStringsSep " " filesToInstall} $out + + runHook postInstall + ''; + + hardeningDisable = ["all"]; + dontStrip = true; + + meta = with lib; + { + homepage = "https://github.com/mtk-openwrt/arm-trusted-firmware"; + description = "MediaTek ARM Trusted Firmware"; + license = [licenses.bsd3]; + maintainers = with maintainers; [cynerd]; + } + // extraMeta; +} diff --git a/pkgs/u-boot-add-openwrt-one.patch b/pkgs/u-boot-add-openwrt-one.patch new file mode 100644 index 0000000..722f1ee --- /dev/null +++ b/pkgs/u-boot-add-openwrt-one.patch @@ -0,0 +1,579 @@ +--- /dev/null ++++ b/arch/arm/dts/openwrt-one.dts +@@ -0,0 +1,203 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2024 John Crispin <john@phrozen.org> ++ */ ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "OpenWrt One"; ++ compatible = "openwrt,one", "mediatek,mt7981"; ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ user { ++ label = "front"; ++ gpios = <&pio 0 GPIO_ACTIVE_LOW>; ++ linux,code = <BTN_0>; ++ }; ++ ++ reset { ++ label = "back"; ++ gpios = <&pio 1 GPIO_ACTIVE_LOW>; ++ linux,code = <BTN_1>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ red { ++ label = "red"; ++ gpios = <&pio 9 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ white { ++ label = "white"; ++ gpios = <&pio 13 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ green { ++ label = "green"; ++ gpios = <&pio 15 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <1>; ++ phy-mode = "gmii"; ++ phy-handle = <&phy0>; ++ ++ phy0: eth-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++}; ++ ++&pio { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-up = <MTK_PUPD_SET_R1R0_11>; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_11>; ++ }; ++ }; ++ ++ spi2_flash_pins: spi2-spi2-pins { ++ mux { ++ function = "spi"; ++ groups = "spi2", "spi2_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_00>; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = <MTK_DRIVE_8mA>; ++ bias-pull-down = <MTK_PUPD_SET_R1R0_00>; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x100000 0xff00000>; ++ }; ++ }; ++ }; ++}; ++ ++&spi2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nor@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <5000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@00000 { ++ label = "bl2-nor"; ++ reg = <0x00000 0x0040000>; ++ }; ++ ++ partition@40000 { ++ label = "factory"; ++ reg = <0x40000 0x00C0000>; ++ }; ++ ++ partition@100000 { ++ label = "fip-nor"; ++ reg = <0x100000 0x0080000>; ++ }; ++ ++ partition@180000 { ++ label = "recovery"; ++ reg = <0x180000 0xc80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/configs/mt7981_openwrt-one-nor_defconfig +@@ -0,0 +1,125 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_ENV_SIZE=0x8000 ++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_RESET_BUTTON_LABEL="back" ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_SPI_BOOT=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_PREBOOT=y ++CONFIG_DEFAULT_FDT_FILE="openwrt-one" ++CONFIG_SYS_CBSIZE=512 ++CONFIG_SYS_PBSIZE=1049 ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="OpenWrt One> " ++CONFIG_SYS_MAXARGS=16 ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++# CONFIG_BOOTM_NETBSD is not set ++# CONFIG_BOOTM_PLAN9 is not set ++# CONFIG_BOOTM_RTEMS is not set ++# CONFIG_BOOTM_VXWORKS is not set ++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++# CONFIG_CMD_UNLZ4 is not set ++# CONFIG_CMD_UNZIP is not set ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/openwrt-one-nor_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_SFDP_SUPPORT=y ++CONFIG_SPI_FLASH_EON=y ++CONFIG_SPI_FLASH_GIGADEVICE=y ++CONFIG_SPI_FLASH_ISSI=y ++CONFIG_SPI_FLASH_MACRONIX=y ++CONFIG_SPI_FLASH_SPANSION=y ++CONFIG_SPI_FLASH_STMICRO=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_SPI_FLASH_XMC=y ++CONFIG_SPI_FLASH_XTX=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_UBI_SILENCE_MSG=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_UBIFS_SILENCE_MSG=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/configs/mt7981_openwrt-one-spi-nand_defconfig +@@ -0,0 +1,126 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="openwrt-one" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_RESET_BUTTON_LABEL="back" ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_SPI_BOOT=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_PREBOOT=y ++CONFIG_DEFAULT_FDT_FILE="openwrt-one" ++CONFIG_SYS_CBSIZE=512 ++CONFIG_SYS_PBSIZE=1049 ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="OpenWrt One> " ++CONFIG_SYS_MAXARGS=16 ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++# CONFIG_BOOTM_NETBSD is not set ++# CONFIG_BOOTM_PLAN9 is not set ++# CONFIG_BOOTM_RTEMS is not set ++# CONFIG_BOOTM_VXWORKS is not set ++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++# CONFIG_CMD_UNLZ4 is not set ++# CONFIG_CMD_UNZIP is not set ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/openwrt-one-spi-nand_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_DM_SPI_FLASH=y ++CONFIG_SPI_FLASH_SFDP_SUPPORT=y ++CONFIG_SPI_FLASH_EON=y ++CONFIG_SPI_FLASH_GIGADEVICE=y ++CONFIG_SPI_FLASH_ISSI=y ++CONFIG_SPI_FLASH_MACRONIX=y ++CONFIG_SPI_FLASH_SPANSION=y ++CONFIG_SPI_FLASH_STMICRO=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_SPI_FLASH_XMC=y ++CONFIG_SPI_FLASH_XTX=y ++CONFIG_SPI_FLASH_MTD=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/defenvs/openwrt-one-nor_env +@@ -0,0 +1,48 @@ ++ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory ++bl2_mtd_write=mtd erase bl2-nor && mtd write bl2-nor $loadaddr 0x0 0x40000 ++bl2_tftp_write=tftpboot $loadaddr $bootfile_bl2_nor && run bl2_mtd_write ++bootcmd=run check_button ; run led_start ; mtd read recovery ${loadaddr} ; bootm ; run led_loop_error ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb ++bootfile_bl2_nor=openwrt-mediatek-filogic-openwrt_one-nor-preloader.bin ++bootfile_fip_nor=openwrt-mediatek-filogic-openwrt_one-nor-bl31-uboot.fip ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run bootcmd ++bootmenu_1=Boot system via TFTP.=run tftp_boot ; run bootmenu_confirm_return ++bootmenu_2=[31mUnlock NOR. (Make sure the NOR/WP jumper is populated)[0m=sf probe 1:0 && sf protect unlock 0x0 0x1000000 ; run bootmenu_confirm_return ++bootmenu_3=[31mLoad BL31+U-Boot FIP via TFTP then write to NOR.[0m=run fip_tftp_write ; run bootmenu_confirm_return ++bootmenu_4=[31mLoad BL2 preloader via TFTP then write to NOR.[0m=run bl2_tftp_write ; run bootmenu_confirm_return ++bootmenu_5=[31mLoad recovery system via TFTP then write to NOR.[0m=run tftp_write ; run bootmenu_confirm_return ++bootmenu_6=[31mLock NOR. (Remove jumper afterwards)[0m=sf probe 1:0 && sf protect lock 0x0 0x1000000 ; run bootmenu_confirm_return ++bootmenu_7=Reboot.=reset ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SPI-NOR][0m ++check_button=if button front ; then run usb_recovery ; run led_loop_error ; fi ++fip_mtd_write=mtd erase fip-nor && mtd write fip-nor $loadaddr ++fip_tftp_write=tftpboot $loadaddr $bootfile_fip_nor && run fip_mtd_write ++ipaddr=192.168.11.11 ++led_done=led green off ; led white on ++led_loop_done=led white off ; led green on ; echo done ; while true ; do sleep 1 ; done ++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done ++led_boot=led green on ; led white on ; led red on ++led_start=led green off ; led red off; led white on ++loadaddr=0x46000000 ++preboot=run led_boot ++recoverfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin ++recoverfile_ubi=openwrt-mediatek-filogic-openwrt_one-factory.ubi ++recovery_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000; do mtd write bl2 $loadaddr $offset 0x40000 ; done ++recovery_write_ubi=mtd erase ubi && mtd write ubi $loadaddr 0 ${filesize} ++serverip=192.168.11.23 ++tftp_boot=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++tftp_write=run led_start ; tftpboot $loadaddr $bootfile && mtd erase recovery 0x0 ${filesize} && mtd write recovery $loadaddr 0x0 ${filesize} ++usb_pgood_delay=4000 ++usb_recovery=run led_start ; usb start && run usb_recovery_bl2 && run usb_recovery_ubi && run led_loop_done ++usb_recovery_bl2=fatload usb 0:1 ${loadaddr} ${recoverfile_bl2} && run recovery_write_bl2 ++usb_recovery_ubi=fatload usb 0:1 ${loadaddr} ${recoverfile_ubi} && run recovery_write_ubi ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu ++_init_env=setenv _init_env ; echo Initialize Env ; run ubi_create_env ; saveenv ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m" +--- /dev/null ++++ b/defenvs/openwrt-one-spi-nand_env +@@ -0,0 +1,62 @@ ++ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory ++ipaddr=192.168.11.11 ++serverip=192.168.11.23 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=run check_buttons ; run led_start ; run boot_calibration ; run boot_production ; run boot_recovery ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb ++bootfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-openwrt_one-snand-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-openwrt_one-squashfs-sysupgrade.itb ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; run led_boot ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SPI-NAND][0m ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_default=run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever ++boot_calibration=ubi read $loadaddr calibration && bootm $loadaddr#$bootconf ++boot_production=led white on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led white off ++boot_recovery=led green on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led green off ++boot_tftp=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_forever=led green off ; led white off ; led red on ; while true ; do run boot_tftp_recovery ; led red off ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi ++led_boot=led green on ; led white on ; led red on ++led_done=led green on ; led white off ; led red off ++led_loop_done=led white off ; led green on ; echo done ; while true ; do sleep 1 ; done ++led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done ++led_start=led white on ; led green off ; led red off ++preboot=run led_boot ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data ++snand_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000 0xc0000 ; do mtd write bl2 $loadaddr $offset 0x40000 ; done ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++usb_pgood_delay=4000 ++usb_recover=run led_start ; usb start && run usb_recover_production && run led_loop_done ++usb_recover_production=fatload usb 0:1 ${loadaddr} ${bootfile_upg} && iminfo $loadaddr && run ubi_write_production ++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m" |