Add external scripts and set boot configuration

5 files changed, 243 insertions, 0 deletions

diff --git a/measure_scripts/11-patch b/measure_scripts/11-patch
new file mode 100755
index 0000000..d29976e
--- /dev/null
+++ b/measure_scripts/11-patch
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set -e
+
+cd ../linux
+
+git reset --hard
+
+git apply --index < ../other_scripts/shark-ryu-board-patch.patch
diff --git a/measure_scripts/20-config b/measure_scripts/20-config
new file mode 100755
index 0000000..707b318
--- /dev/null
+++ b/measure_scripts/20-config
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+set -e
+
+cd ../linux
+
+export ARCH=powerpc
+make allnoconfig
+
+conf() {
+    sed -i -n -e "/\\bCONFIG_$1\\b/!p" .config
+    echo CONFIG_$1=$2 >> .config
+}
+
+GDESC=$(git describe)
+if [ ${GDESC#v2.6} != ${GDESC} ]; then
+    conf PPC_DISABLE_WERROR y
+fi
+
+conf BINFMT_ELF y
+
+conf BLK_DEV_INITRD y
+conf INITRAMFS_SOURCE '""'
+conf INITRAMFS_ROOT_UID 0
+conf INITRAMFS_ROOT_GID 0
+conf INITRAMFS_COMPRESSION_NONE y
+conf INITRAMFS_COMPRESSION_GZIP n
+conf INITRAMFS_COMPRESSION_BZIP2 n
+conf INITRAMFS_COMPRESSION_LZMA n
+conf INITRAMFS_COMPRESSION_XZ n
+conf INITRAMFS_COMPRESSION_LZO n
+conf RD_GZIP y			# Needed for 3.17+
+conf SIGNALFD y 		# Needed since v3.17-5503-g35a9ad8 to enable ANON_INODES (only needed until the problem http://mid.gmane.org/87vbnt1js4.fsf@steelpick.2x.cz is fixed)
+
+conf PPC_MPC52xx y
+conf PPC_MPC5200_SIMPLE y
+conf SERIAL_CORE y
+conf SERIAL_CORE_CONSOLE y
+conf SERIAL_MPC52xx y
+conf SERIAL_MPC52xx_CONSOLE y
+conf SERIAL_MPC52xx_CONSOLE_BAUD 115200
+
+conf NET y
+conf CAN y
+conf CAN_RAW y
+conf CAN_GW y
+conf CAN_VCAN y
+conf CAN_DEV y
+conf CAN_CALC_BITTIMING y
+conf CAN_MSCAN y
+conf CAN_MPC5XXX y
+
+conf NETDEVICES y
+conf ETHERNET y
+conf DMADEVICES y
+conf PPC_BESTCOMM y
+conf NET_VENDOR_FREESCALE y
+conf FEC_MPC52xx y
+conf FEC_MPC52xx_MDIO y
+
+conf TTY y
+conf PROC_FS y
+conf PRINTK y # Not needed but useful for debugging
+
+# To have netlink for kernel cangw
+conf INET y
+conf NETFILTER y
+
+conf PACKET y # ugw mmap
+
+chronic ../other_scripts/my-oldconfig.pl
diff --git a/measure_scripts/30-compile b/measure_scripts/30-compile
new file mode 100755
index 0000000..29da38a
--- /dev/null
+++ b/measure_scripts/30-compile
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+cd ../linux
+
+export ARCH=powerpc
+export CROSS_COMPILE=/opt/OSELAS.Toolchain-2012.12.1/powerpc-603e-linux-gnu/gcc-4.7.2-glibc-2.16.0-binutils-2.22-kernel-3.6-sanitized/bin/powerpc-603e-linux-gnu-
+
+test -t 0 || CHRONIC=chronic
+
+$CHRONIC make -j$(nproc) uImage
diff --git a/measure_scripts/my-oldconfig.pl b/measure_scripts/my-oldconfig.pl
new file mode 100755
index 0000000..736bf57
--- /dev/null
+++ b/measure_scripts/my-oldconfig.pl
@@ -0,0 +1,12 @@
+#!/usr/bin/perl -w
+
+use Expect;
+my $exp = Expect->spawn("make oldconfig")
+    or die "Cannot spawn make oldconfig: $!\n";
+
+my $timeout = 10;
+$exp->expect($timeout,
+	     [ '^ *choice\[.*\]: '           => sub { $exp->send("\n");  exp_continue; } ],
+	     [ '^([^ ]| *[^>0-9]).*\(NEW\) ' => sub { $exp->send("n\n"); exp_continue; } ],
+	     [ "configuration written to .config" ],
+    ) || die "Timeout"
diff --git a/measure_scripts/shark-ryu-board-patch.patch b/measure_scripts/shark-ryu-board-patch.patch
new file mode 100644
index 0000000..e43e35d
--- /dev/null
+++ b/measure_scripts/shark-ryu-board-patch.patch
@@ -0,0 +1,139 @@
+From 87a8e2b9406cc7f8779f02047e0cd1594c570b78 Mon Sep 17 00:00:00 2001
+From: Michal Sojka <sojkam1@fel.cvut.cz>
+Date: Thu, 23 Jan 2014 23:44:55 +0100
+Subject: [PATCH] Shark/ryu board patch
+
+This is a new version of the patch. It is not based on historical patches
+from Michal Hrouda, but on mpc5200_simple. It boots, serial line and
+Ethernet work. I haven't check whether flash works.
+---
+ arch/powerpc/boot/dts/shark-ryu.dts          | 104 +++++++++++++++++++++++++++
+ arch/powerpc/platforms/52xx/mpc5200_simple.c |   1 +
+ 2 files changed, 105 insertions(+)
+ create mode 100644 arch/powerpc/boot/dts/shark-ryu.dts
+
+diff --git a/arch/powerpc/boot/dts/shark-ryu.dts b/arch/powerpc/boot/dts/shark-ryu.dts
+new file mode 100644
+index 0000000..63e48a8
+--- /dev/null
++++ b/arch/powerpc/boot/dts/shark-ryu.dts
+@@ -0,0 +1,104 @@
++/*
++ * Shark(MPC5200) board Device Tree Source
++ *
++ * Copyright 2006-2007 Secret Lab Technologies Ltd.
++ * Grant Likely <grant.likely@secretlab.ca>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++/include/ "mpc5200b.dtsi"
++
++/ {
++	model = "cvut,ryu";
++	compatible = "midam,shark";
++
++	memory {
++		reg = <0x00000000 0x08000000>;	// 128MB
++	};
++
++	soc: soc5200@f0000000 {
++		psc@2000 {			// PSC1
++			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
++		};
++		psc5: psc@2800 {		// PSC5
++			status = "disabled";
++		};
++
++		ethernet@3000 {
++			phy-handle = <&phy0>;
++		};
++
++		mdio@3000 {
++			phy0: ethernet-phy@1f {
++				device_type = "ethernet-phy";
++				reg = <0x1f>;
++			};
++		};
++
++		i2c@3d40 {
++			rtc@68 {
++				compatible = "dallas,ds1307";
++				reg = <0x68>;
++			};
++		};
++	};
++
++	localbus {
++		ranges = <0 0 0xfc000000 0x04000000>;
++
++		flash@0,0 {
++			compatible = "cfi-flash";
++			reg = <0 0 0x04000000>;
++			bank-width = <2>;
++			device-width = <2>;
++			#size-cells = <1>;
++			#address-cells = <1>;
++
++			uboot@0 {
++				label = "u-boot";
++				reg = <0 0x00100000>;
++				read-only;
++			};
++
++			kernel@100000 {
++				label = "kernel";
++				reg = <0x00100000 0x00300000>;
++				read-only;
++			};
++
++			filesystem@400000 {
++				label = "filesystem";
++				reg = <0x00400000 0x03c00000>;
++			};
++		};
++	};
++
++	pci: pci@f0000d00 {
++		interrupt-map-mask = <0xf800 0 0 7>;
++		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
++				 0xc000 0 0 2 &mpc5200_pic 1 1 3
++				 0xc000 0 0 3 &mpc5200_pic 1 2 3
++				 0xc000 0 0 4 &mpc5200_pic 1 3 3
++
++				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
++				 0xc800 0 0 2 &mpc5200_pic 1 2 3
++				 0xc800 0 0 3 &mpc5200_pic 1 3 3
++				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
++		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
++			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
++			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
++	};
++	motorek@0 {
++		device_type = "motorek";
++		pwmf = <&gpt2>;
++		pwmb = <&gpt3>;
++		irca = <&gpt5>;
++		ircb = <&gpt4>;
++		interrupts = <0 0 1>;
++		//gpios = <&gpio_a
++	};
++};
+diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
+index 792a301..82aaa6e 100644
+--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
++++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
+@@ -62,6 +62,7 @@ static const char *board[] __initdata = {
+ 	"promess,motionpro",
+ 	"schindler,cm5200",
+ 	"tqc,tqm5200",
++	"midam,shark",
+ 	NULL
+ };
+ 
+-- 
+1.8.5.2
+