1 files changed, 0 insertions, 217 deletions
diff --git a/app-admin/mysudo/mysudo-1.8.20.ebuild b/app-admin/mysudo/mysudo-1.8.20.ebuild
deleted file mode 100644
index af69dfc..0000000
--- a/app-admin/mysudo/mysudo-1.8.20.ebuild
+++ /dev/null
@@ -1,217 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit eutils pam multilib libtool
-
-MY_P=${P/_/}
-MY_P=${MY_P/beta/b}
-MY_P=${MY_P/mysudo/sudo}
-
-uri_prefix=
-case ${P} in
-	*_beta*|*_rc*) uri_prefix=beta/ ;;
-esac
-
-DESCRIPTION="Allows users or groups to run commands as other users"
-HOMEPAGE="http://www.sudo.ws/"
-SRC_URI="http://www.sudo.ws/sudo/dist/${uri_prefix}${MY_P}.tar.gz
-	ftp://ftp.sudo.ws/pub/sudo/${uri_prefix}${MY_P}.tar.gz"
-
-# Basic license is ISC-style as-is, some files are released under
-# 3-clause BSD license
-LICENSE="ISC BSD"
-SLOT="0"
-if [[ ${PV} != *_beta* ]] && [[ ${PV} != *_rc* ]] ; then
-	KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd ~sparc-solaris"
-fi
-IUSE="with-secure-path gcrypt ldap nls pam offensive openssl selinux skey +sendmail"
-
-CDEPEND="
-	gcrypt? ( dev-libs/libgcrypt:= )
-	openssl? ( dev-libs/openssl:0= )
-	pam? ( virtual/pam )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? (
-		>=net-nds/openldap-2.1.30-r1
-		dev-libs/cyrus-sasl
-	)
-	sys-libs/zlib
-"
-RDEPEND="
-	${CDEPEND}
-	selinux? ( sec-policy/selinux-sudo )
-	ldap? ( dev-lang/perl )
-	pam? ( sys-auth/pambase )
-	>=app-misc/editor-wrapper-3
-	virtual/editor
-	sendmail? ( virtual/mta )
-"
-DEPEND="
-	${CDEPEND}
-	sys-devel/bison
-"
-
-S="${WORKDIR}/${MY_P}"
-
-REQUIRED_USE="
-	pam? ( !skey )
-	skey? ( !pam )
-	?? ( gcrypt openssl )
-"
-
-MAKEOPTS+=" SAMPLES="
-
-src_prepare() {
-	default
-	elibtoolize
-}
-
-set_rootpath() {
-	# FIXME: secure_path is a compile time setting. using ROOTPATH
-	# is not perfect, env-update may invalidate this, but until it
-	# is available as a sudoers setting this will have to do.
-	einfo "Setting secure_path ..."
-
-	# first extract the default ROOTPATH from build env
-	ROOTPATH=$(unset ROOTPATH; . "${EPREFIX}"/etc/profile.env; echo "${ROOTPATH}")
-	if [[ -z ${ROOTPATH} ]] ; then
-		ewarn "	Failed to find ROOTPATH, please report this"
-	fi
-
-	# then remove duplicate path entries
-	cleanpath() {
-		local newpath thisp IFS=:
-		for thisp in $1 ; do
-			if [[ :${newpath}: != *:${thisp}:* ]] ; then
-				newpath+=:$thisp
-			else
-				einfo "   Duplicate entry ${thisp} removed..."
-			fi
-		done
-		ROOTPATH=${newpath#:}
-	}
-	cleanpath /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/opt/bin${ROOTPATH:+:${ROOTPATH}}
-
-	# finally, strip gcc paths #136027
-	rmpath() {
-		local e newpath thisp IFS=:
-		for thisp in ${ROOTPATH} ; do
-			for e ; do [[ $thisp == $e ]] && continue 2 ; done
-			newpath+=:$thisp
-		done
-		ROOTPATH=${newpath#:}
-	}
-	rmpath '*/gcc-bin/*' '*/gnat-gcc-bin/*' '*/gnat-gcc/*'
-
-	einfo "... done"
-}
-
-src_configure() {
-	local ROOTPATH
-	set_rootpath
-
-	# audit: somebody got to explain me how I can test this before I
-	# enable it.. - Diego
-	# plugindir: autoconf code is crappy and does not delay evaluation
-	# until `make` time, so we have to use a full path here rather than
-	# basing off other values.
-	myeconfargs=(
-		--enable-zlib=system
-		--with-editor="${EPREFIX}"/usr/libexec/editor
-		--with-env-editor
-		--with-plugindir="${EPREFIX}"/usr/$(get_libdir)/sudo
-		--with-rundir="${EPREFIX}"/var/run/sudo
-		$(use_with with-secure-path with-secure-path ${ROOTPATH})
-		--with-vardir="${EPREFIX}"/var/db/sudo
-		--without-linux-audit
-		--without-opie
-		$(use_enable gcrypt)
-		$(use_enable nls)
-		$(use_enable openssl)
-		$(use_with offensive insults)
-		$(use_with offensive all-insults)
-		$(use_with ldap ldap_conf_file /etc/ldap.conf.sudo)
-		$(use_with ldap)
-		$(use_with pam)
-		$(use_with skey)
-		$(use_with selinux)
-		$(use_with sendmail)
-	)
-	econf "${myeconfargs[@]}"
-}
-
-src_install() {
-	default
-
-	if use ldap ; then
-		dodoc README.LDAP
-		dosbin plugins/sudoers/sudoers2ldif
-
-		cat <<-EOF > "${T}"/ldap.conf.sudo
-		# See ldap.conf(5) and README.LDAP for details
-		# This file should only be readable by root
-
-		# supported directives: host, port, ssl, ldap_version
-		# uri, binddn, bindpw, sudoers_base, sudoers_debug
-		# tls_{checkpeer,cacertfile,cacertdir,randfile,ciphers,cert,key}
-		EOF
-
-		insinto /etc
-		doins "${T}"/ldap.conf.sudo
-		fperms 0440 /etc/ldap.conf.sudo
-
-		insinto /etc/openldap/schema
-		newins doc/schema.OpenLDAP sudo.schema
-	fi
-
-	pamd_mimic system-auth sudo auth account session
-
-	keepdir /var/db/sudo
-	fperms 0700 /var/db/sudo
-
-	# Don't install into /var/run as that is a tmpfs most of the time
-	# (bug #504854)
-	rm -rf "${D}"/var/run
-}
-
-pkg_postinst() {
-	if use ldap ; then
-		ewarn
-		ewarn "sudo uses the /etc/ldap.conf.sudo file for ldap configuration."
-		ewarn
-		if grep -qs '^[[:space:]]*sudoers:' "${ROOT}"/etc/nsswitch.conf ; then
-			ewarn "In 1.7 series, LDAP is no more consulted, unless explicitly"
-			ewarn "configured in /etc/nsswitch.conf."
-			ewarn
-			ewarn "To make use of LDAP, add this line to your /etc/nsswitch.conf:"
-			ewarn "  sudoers: ldap files"
-			ewarn
-		fi
-	fi
-	if use prefix ; then
-		ewarn
-		ewarn "To use sudo, you need to change file ownership and permissions"
-		ewarn "with root privileges, as follows:"
-		ewarn
-		ewarn "  # chown root:root ${EPREFIX}/usr/bin/sudo"
-		ewarn "  # chown root:root ${EPREFIX}/usr/lib/sudo/sudoers.so"
-		ewarn "  # chown root:root ${EPREFIX}/etc/sudoers"
-		ewarn "  # chown root:root ${EPREFIX}/etc/sudoers.d"
-		ewarn "  # chown root:root ${EPREFIX}/var/db/sudo"
-		ewarn "  # chmod 4111 ${EPREFIX}/usr/bin/sudo"
-		ewarn
-	fi
-
-	elog "To use the -A (askpass) option, you need to install a compatible"
-	elog "password program from the following list. Starred packages will"
-	elog "automatically register for the use with sudo (but will not force"
-	elog "the -A option):"
-	elog ""
-	elog " [*] net-misc/ssh-askpass-fullscreen"
-	elog "     net-misc/x11-ssh-askpass"
-	elog ""
-	elog "You can override the choice by setting the SUDO_ASKPASS environmnent"
-	elog "variable to the program you want to use."
-}