2 files changed, 88 insertions, 0 deletions
diff --git a/bigclown-mqtt2influxdb/files/config.yml b/bigclown-mqtt2influxdb/files/config.yml
new file mode 100644
index 0000000..350c85a
--- /dev/null
+++ b/bigclown-mqtt2influxdb/files/config.yml
@@ -0,0 +1,67 @@
+## Example bigclown-mqtt2influxdb configuration
+
+# MQTT configuration
+mqtt:
+  #host: 127.0.0.1
+  #port: 1883
+
+# InfluxDB configuration
+influxdb:
+  #host: 127.0.0.1
+  #port: 8086
+  #database: node
+
+# This is default configuration used to mirror all values produced by default
+# BigClown modules firmware. You might want to add your topics or drop those for
+# modules you don't own.
+points:
+  - measurement: temperature
+    topic: node/+/thermometer/+/temperature
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+      channel: $.topic[3]
+
+  - measurement: relative-humidity
+    topic: node/+/hygrometer/0:4/relative-humidity
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+
+  - measurement: illuminance
+    topic: node/+/lux-meter/0:0/illuminance
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+
+  - measurement: pressure
+    topic: node/+/barometer/0:0/pressure
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+
+  - measurement: co2
+    topic: node/+/co2-meter/-/concentration
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+
+  - measurement: voltage
+    topic: node/+/battery/+/voltage
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+
+  - measurement: button
+    topic: node/+/push-button/+/event-count
+    fields:
+      value: $.payload
+    tags:
+      id: $.topic[1]
+      channel: $.topic[3]
diff --git a/bigclown-mqtt2influxdb/files/init b/bigclown-mqtt2influxdb/files/init
new file mode 100644
index 0000000..5c95600
--- /dev/null
+++ b/bigclown-mqtt2influxdb/files/init
@@ -0,0 +1,21 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=1
+
+USE_PROCD=1
+
+PROG=/usr/bin/mqtt2influxdb
+CONF=/etc/bigclown-mqtt2influxdb.yml
+
+start_service() {
+	procd_open_instance
+	procd_set_param command "$PROG" -d -c "$CONF"
+	procd_set_param stdout 1
+	procd_set_param stderr 1
+	procd_close_instance
+}
+
+stop_service() {
+	service_stop "$PROG"
+}