From 462a088c474832b19ff2730de1e6bea66d399c23 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Karel=20Ko=C4=8D=C3=AD?= Date: Sat, 15 Oct 2022 23:01:29 +0200 Subject: Add Turris kernel (includes patches from OpenWrt) --- ...-qca8k-add-support-for-sgmii-falling-edge.patch | 127 +++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 pkgs/patches-linux-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch (limited to 'pkgs/patches-linux-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch') diff --git a/pkgs/patches-linux-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch b/pkgs/patches-linux-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch new file mode 100644 index 0000000..e464452 --- /dev/null +++ b/pkgs/patches-linux-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch @@ -0,0 +1,127 @@ +From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:08 +0200 +Subject: net: dsa: qca8k: add support for sgmii falling edge + +Add support for this in the qca8k driver. Also add support for SGMII +rx/tx clock falling edge. This is only present for pad0, pad5 and +pad6 have these bit reserved from Documentation. Add a comment that this +is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and +setting falling in port0 applies to both configuration with sgmii used +for port0 or port6. + +Co-developed-by: Matthew Hagan +Signed-off-by: Matthew Hagan +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 4 ++++ + 2 files changed, 67 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri + } + + static int ++qca8k_parse_port_config(struct qca8k_priv *priv) ++{ ++ struct device_node *port_dn; ++ phy_interface_t mode; ++ struct dsa_port *dp; ++ int port, ret; ++ ++ /* We have 2 CPU port. Check them */ ++ for (port = 0; port < QCA8K_NUM_PORTS; port++) { ++ /* Skip every other port */ ++ if (port != 0 && port != 6) ++ continue; ++ ++ dp = dsa_to_port(priv->ds, port); ++ port_dn = dp->dn; ++ ++ if (!of_device_is_available(port_dn)) ++ continue; ++ ++ ret = of_get_phy_mode(port_dn, &mode); ++ if (ret) ++ continue; ++ ++ if (mode == PHY_INTERFACE_MODE_SGMII) { ++ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) ++ priv->sgmii_tx_clk_falling_edge = true; ++ ++ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) ++ priv->sgmii_rx_clk_falling_edge = true; ++ } ++ } ++ ++ return 0; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds) + return -EINVAL; + } + ++ /* Parse CPU port config to be later used in phy_link mac_config */ ++ ret = qca8k_parse_port_config(priv); ++ if (ret) ++ return ret; ++ + mutex_init(&priv->reg_mutex); + + /* Start by setting up the register mapping */ +@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); ++ ++ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and ++ * falling edge is set writing in the PORT0 PAD reg ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8327 || ++ priv->switch_id == QCA8K_ID_QCA8337) ++ reg = QCA8K_REG_PORT0_PAD_CTRL; ++ ++ val = 0; ++ ++ /* SGMII Clock phase configuration */ ++ if (priv->sgmii_rx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; ++ ++ if (priv->sgmii_tx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; ++ ++ if (val) ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | ++ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, ++ val); + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -35,6 +35,8 @@ + #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) + #define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 ++#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) ++#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18) + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) +@@ -260,6 +262,8 @@ struct qca8k_priv { + u8 switch_revision; + u8 rgmii_tx_delay; + u8 rgmii_rx_delay; ++ bool sgmii_rx_clk_falling_edge; ++ bool sgmii_tx_clk_falling_edge; + bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; -- cgit v1.2.3