From 462a088c474832b19ff2730de1e6bea66d399c23 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Karel=20Ko=C4=8D=C3=AD?= Date: Sat, 15 Oct 2022 23:01:29 +0200 Subject: Add Turris kernel (includes patches from OpenWrt) --- ...ps-bpf-Remove-old-BPF-JIT-implementations.patch | 387 +++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 pkgs/patches-linux-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch (limited to 'pkgs/patches-linux-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch') diff --git a/pkgs/patches-linux-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch b/pkgs/patches-linux-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch new file mode 100644 index 0000000..e25c336 --- /dev/null +++ b/pkgs/patches-linux-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch @@ -0,0 +1,387 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:08 +0200 +Subject: [PATCH] mips: bpf: Remove old BPF JIT implementations + +This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations. +They are replaced by a new eBPF implementation that supports both 32-bit +and 64-bit MIPS CPUs. + +Signed-off-by: Johan Almbladh +--- + delete mode 100644 arch/mips/net/bpf_jit.c + delete mode 100644 arch/mips/net/bpf_jit.h + delete mode 100644 arch/mips/net/bpf_jit_asm.S + delete mode 100644 arch/mips/net/ebpf_jit.c + +--- a/arch/mips/net/bpf_jit.h ++++ /dev/null +@@ -1,81 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0-only */ +-/* +- * Just-In-Time compiler for BPF filters on MIPS +- * +- * Copyright (c) 2014 Imagination Technologies Ltd. +- * Author: Markos Chandras +- */ +- +-#ifndef BPF_JIT_MIPS_OP_H +-#define BPF_JIT_MIPS_OP_H +- +-/* Registers used by JIT */ +-#define MIPS_R_ZERO 0 +-#define MIPS_R_V0 2 +-#define MIPS_R_A0 4 +-#define MIPS_R_A1 5 +-#define MIPS_R_T4 12 +-#define MIPS_R_T5 13 +-#define MIPS_R_T6 14 +-#define MIPS_R_T7 15 +-#define MIPS_R_S0 16 +-#define MIPS_R_S1 17 +-#define MIPS_R_S2 18 +-#define MIPS_R_S3 19 +-#define MIPS_R_S4 20 +-#define MIPS_R_S5 21 +-#define MIPS_R_S6 22 +-#define MIPS_R_S7 23 +-#define MIPS_R_SP 29 +-#define MIPS_R_RA 31 +- +-/* Conditional codes */ +-#define MIPS_COND_EQ 0x1 +-#define MIPS_COND_GE (0x1 << 1) +-#define MIPS_COND_GT (0x1 << 2) +-#define MIPS_COND_NE (0x1 << 3) +-#define MIPS_COND_ALL (0x1 << 4) +-/* Conditionals on X register or K immediate */ +-#define MIPS_COND_X (0x1 << 5) +-#define MIPS_COND_K (0x1 << 6) +- +-#define r_ret MIPS_R_V0 +- +-/* +- * Use 2 scratch registers to avoid pipeline interlocks. +- * There is no overhead during epilogue and prologue since +- * any of the $s0-$s6 registers will only be preserved if +- * they are going to actually be used. +- */ +-#define r_skb_hl MIPS_R_S0 /* skb header length */ +-#define r_skb_data MIPS_R_S1 /* skb actual data */ +-#define r_off MIPS_R_S2 +-#define r_A MIPS_R_S3 +-#define r_X MIPS_R_S4 +-#define r_skb MIPS_R_S5 +-#define r_M MIPS_R_S6 +-#define r_skb_len MIPS_R_S7 +-#define r_s0 MIPS_R_T4 /* scratch reg 1 */ +-#define r_s1 MIPS_R_T5 /* scratch reg 2 */ +-#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */ +-#define r_tmp MIPS_R_T7 /* No need to preserve this */ +-#define r_zero MIPS_R_ZERO +-#define r_sp MIPS_R_SP +-#define r_ra MIPS_R_RA +- +-#ifndef __ASSEMBLY__ +- +-/* Declare ASM helpers */ +- +-#define DECLARE_LOAD_FUNC(func) \ +- extern u8 func(unsigned long *skb, int offset); \ +- extern u8 func##_negative(unsigned long *skb, int offset); \ +- extern u8 func##_positive(unsigned long *skb, int offset) +- +-DECLARE_LOAD_FUNC(sk_load_word); +-DECLARE_LOAD_FUNC(sk_load_half); +-DECLARE_LOAD_FUNC(sk_load_byte); +- +-#endif +- +-#endif /* BPF_JIT_MIPS_OP_H */ +--- a/arch/mips/net/bpf_jit_asm.S ++++ /dev/null +@@ -1,285 +0,0 @@ +-/* +- * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF +- * compiler. +- * +- * Copyright (C) 2015 Imagination Technologies Ltd. +- * Author: Markos Chandras +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; version 2 of the License. +- */ +- +-#include +-#include +-#include +-#include "bpf_jit.h" +- +-/* ABI +- * +- * r_skb_hl skb header length +- * r_skb_data skb data +- * r_off(a1) offset register +- * r_A BPF register A +- * r_X PF register X +- * r_skb(a0) *skb +- * r_M *scratch memory +- * r_skb_le skb length +- * r_s0 Scratch register 0 +- * r_s1 Scratch register 1 +- * +- * On entry: +- * a0: *skb +- * a1: offset (imm or imm + X) +- * +- * All non-BPF-ABI registers are free for use. On return, we only +- * care about r_ret. The BPF-ABI registers are assumed to remain +- * unmodified during the entire filter operation. +- */ +- +-#define skb a0 +-#define offset a1 +-#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */ +- +- /* We know better :) so prevent assembler reordering etc */ +- .set noreorder +- +-#define is_offset_negative(TYPE) \ +- /* If offset is negative we have more work to do */ \ +- slti t0, offset, 0; \ +- bgtz t0, bpf_slow_path_##TYPE##_neg; \ +- /* Be careful what follows in DS. */ +- +-#define is_offset_in_header(SIZE, TYPE) \ +- /* Reading from header? */ \ +- addiu $r_s0, $r_skb_hl, -SIZE; \ +- slt t0, $r_s0, offset; \ +- bgtz t0, bpf_slow_path_##TYPE; \ +- +-LEAF(sk_load_word) +- is_offset_negative(word) +-FEXPORT(sk_load_word_positive) +- is_offset_in_header(4, word) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- .set reorder +- lw $r_A, 0(t1) +- .set noreorder +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh t0, $r_A +- rotr $r_A, t0, 16 +-# else +- sll t0, $r_A, 24 +- srl t1, $r_A, 24 +- srl t2, $r_A, 8 +- or t0, t0, t1 +- andi t2, t2, 0xff00 +- andi t1, $r_A, 0xff00 +- or t0, t0, t2 +- sll t1, t1, 8 +- or $r_A, t0, t1 +-# endif +-#endif +- jr $r_ra +- move $r_ret, zero +- END(sk_load_word) +- +-LEAF(sk_load_half) +- is_offset_negative(half) +-FEXPORT(sk_load_half_positive) +- is_offset_in_header(2, half) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- lhu $r_A, 0(t1) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh $r_A, $r_A +-# else +- sll t0, $r_A, 8 +- srl t1, $r_A, 8 +- andi t0, t0, 0xff00 +- or $r_A, t0, t1 +-# endif +-#endif +- jr $r_ra +- move $r_ret, zero +- END(sk_load_half) +- +-LEAF(sk_load_byte) +- is_offset_negative(byte) +-FEXPORT(sk_load_byte_positive) +- is_offset_in_header(1, byte) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- lbu $r_A, 0(t1) +- jr $r_ra +- move $r_ret, zero +- END(sk_load_byte) +- +-/* +- * call skb_copy_bits: +- * (prototype in linux/skbuff.h) +- * +- * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len) +- * +- * o32 mandates we leave 4 spaces for argument registers in case +- * the callee needs to use them. Even though we don't care about +- * the argument registers ourselves, we need to allocate that space +- * to remain ABI compliant since the callee may want to use that space. +- * We also allocate 2 more spaces for $r_ra and our return register (*to). +- * +- * n64 is a bit different. The *caller* will allocate the space to preserve +- * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no +- * good reason but it does not matter that much really. +- * +- * (void *to) is returned in r_s0 +- * +- */ +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-#define DS_OFFSET(SIZE) (4 * SZREG) +-#else +-#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE)) +-#endif +-#define bpf_slow_path_common(SIZE) \ +- /* Quick check. Are we within reasonable boundaries? */ \ +- LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \ +- sltu $r_s0, offset, $r_s1; \ +- beqz $r_s0, fault; \ +- /* Load 4th argument in DS */ \ +- LONG_ADDIU a3, zero, SIZE; \ +- PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ +- PTR_LA t0, skb_copy_bits; \ +- PTR_S $r_ra, (5 * SZREG)($r_sp); \ +- /* Assign low slot to a2 */ \ +- PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \ +- jalr t0; \ +- /* Reset our destination slot (DS but it's ok) */ \ +- INT_S zero, (4 * SZREG)($r_sp); \ +- /* \ +- * skb_copy_bits returns 0 on success and -EFAULT \ +- * on error. Our data live in a2. Do not bother with \ +- * our data if an error has been returned. \ +- */ \ +- /* Restore our frame */ \ +- PTR_L $r_ra, (5 * SZREG)($r_sp); \ +- INT_L $r_s0, (4 * SZREG)($r_sp); \ +- bltz v0, fault; \ +- PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ +- move $r_ret, zero; \ +- +-NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) +- bpf_slow_path_common(4) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh t0, $r_s0 +- jr $r_ra +- rotr $r_A, t0, 16 +-# else +- sll t0, $r_s0, 24 +- srl t1, $r_s0, 24 +- srl t2, $r_s0, 8 +- or t0, t0, t1 +- andi t2, t2, 0xff00 +- andi t1, $r_s0, 0xff00 +- or t0, t0, t2 +- sll t1, t1, 8 +- jr $r_ra +- or $r_A, t0, t1 +-# endif +-#else +- jr $r_ra +- move $r_A, $r_s0 +-#endif +- +- END(bpf_slow_path_word) +- +-NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) +- bpf_slow_path_common(2) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- jr $r_ra +- wsbh $r_A, $r_s0 +-# else +- sll t0, $r_s0, 8 +- andi t1, $r_s0, 0xff00 +- andi t0, t0, 0xff00 +- srl t1, t1, 8 +- jr $r_ra +- or $r_A, t0, t1 +-# endif +-#else +- jr $r_ra +- move $r_A, $r_s0 +-#endif +- +- END(bpf_slow_path_half) +- +-NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp) +- bpf_slow_path_common(1) +- jr $r_ra +- move $r_A, $r_s0 +- +- END(bpf_slow_path_byte) +- +-/* +- * Negative entry points +- */ +- .macro bpf_is_end_of_data +- li t0, SKF_LL_OFF +- /* Reading link layer data? */ +- slt t1, offset, t0 +- bgtz t1, fault +- /* Be careful what follows in DS. */ +- .endm +-/* +- * call skb_copy_bits: +- * (prototype in linux/filter.h) +- * +- * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, +- * int k, unsigned int size) +- * +- * see above (bpf_slow_path_common) for ABI restrictions +- */ +-#define bpf_negative_common(SIZE) \ +- PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ +- PTR_LA t0, bpf_internal_load_pointer_neg_helper; \ +- PTR_S $r_ra, (5 * SZREG)($r_sp); \ +- jalr t0; \ +- li a2, SIZE; \ +- PTR_L $r_ra, (5 * SZREG)($r_sp); \ +- /* Check return pointer */ \ +- beqz v0, fault; \ +- PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ +- /* Preserve our pointer */ \ +- move $r_s0, v0; \ +- /* Set return value */ \ +- move $r_ret, zero; \ +- +-bpf_slow_path_word_neg: +- bpf_is_end_of_data +-NESTED(sk_load_word_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(4) +- jr $r_ra +- lw $r_A, 0($r_s0) +- END(sk_load_word_negative) +- +-bpf_slow_path_half_neg: +- bpf_is_end_of_data +-NESTED(sk_load_half_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(2) +- jr $r_ra +- lhu $r_A, 0($r_s0) +- END(sk_load_half_negative) +- +-bpf_slow_path_byte_neg: +- bpf_is_end_of_data +-NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(1) +- jr $r_ra +- lbu $r_A, 0($r_s0) +- END(sk_load_byte_negative) +- +-fault: +- jr $r_ra +- addiu $r_ret, zero, 1 -- cgit v1.2.3