diff options
Diffstat (limited to 'pkgs/patches-linux-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch')
| -rw-r--r-- | pkgs/patches-linux-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/pkgs/patches-linux-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch b/pkgs/patches-linux-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch new file mode 100644 index 0000000..89e9b3f --- /dev/null +++ b/pkgs/patches-linux-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch @@ -0,0 +1,127 @@ +From 67999555ff42e91de7654488d9a7735bd9e84555 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith <ansuelsmth@gmail.com> +Date: Sun, 10 Oct 2021 00:46:18 +0200 +Subject: net: phy: at803x: better describe debug regs + +Give a name to known debug regs from Documentation instead of using +unknown hex values. + +Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/at803x.c | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -86,12 +86,12 @@ + #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + +-#define AT803X_DEBUG_REG_0 0x00 ++#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 + #define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) + #define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + +-#define AT803X_DEBUG_REG_5 0x05 ++#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + + #define AT803X_DEBUG_REG_HIB_CTRL 0x0b +@@ -100,7 +100,7 @@ + + #define AT803X_DEBUG_REG_3C 0x3C + +-#define AT803X_DEBUG_REG_3D 0x3D ++#define AT803X_DEBUG_REG_GREEN 0x3D + #define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + + #define AT803X_DEBUG_REG_1F 0x1F +@@ -284,25 +284,25 @@ static int at803x_read_page(struct phy_d + + static int at803x_enable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0, + AT803X_DEBUG_RX_CLK_DLY_EN); + } + + static int at803x_enable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0, + AT803X_DEBUG_TX_CLK_DLY_EN); + } + + static int at803x_disable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + AT803X_DEBUG_RX_CLK_DLY_EN, 0); + } + + static int at803x_disable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, + AT803X_DEBUG_TX_CLK_DLY_EN, 0); + } + +@@ -1292,9 +1292,9 @@ static int qca83xx_config_init(struct ph + switch (switch_revision) { + case 1: + /* For 100M waveform */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea); + /* Turn on Gigabit clock */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0); + break; + + case 2: +@@ -1302,8 +1302,8 @@ static int qca83xx_config_init(struct ph + fallthrough; + case 4: + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); + break; + } +@@ -1314,7 +1314,7 @@ static int qca83xx_config_init(struct ph + */ + if (phydev->drv->phy_id == QCA8327_A_PHY_ID || + phydev->drv->phy_id == QCA8327_B_PHY_ID) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + + /* Following original QCA sourcecode set port to prefer master */ +@@ -1332,12 +1332,12 @@ static void qca83xx_link_change_notify(s + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, + QCA8327_DEBUG_MANU_CTRL_EN); + } else { + /* Reset DAC Amplitude adjustment */ +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + } + } +@@ -1384,7 +1384,7 @@ static int qca83xx_suspend(struct phy_de + phy_modify(phydev, MII_BMCR, mask, 0); + } + +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, + AT803X_DEBUG_GATE_CLK_IN1000, 0); + + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, |