From e573b3020c032400eed60b649a2cbf55266e6bb0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Karel=20Ko=C4=8D=C3=AD?= Date: Thu, 30 Jun 2016 16:03:25 +0200 Subject: Add current configurations from old repository --- vim/bundle/vim-fugitive/doc/fugitive.txt | 357 +++++++++++++++++++++++++++++++ 1 file changed, 357 insertions(+) create mode 100644 vim/bundle/vim-fugitive/doc/fugitive.txt (limited to 'vim/bundle/vim-fugitive/doc') diff --git a/vim/bundle/vim-fugitive/doc/fugitive.txt b/vim/bundle/vim-fugitive/doc/fugitive.txt new file mode 100644 index 0000000..51fc591 --- /dev/null +++ b/vim/bundle/vim-fugitive/doc/fugitive.txt @@ -0,0 +1,357 @@ +*fugitive.txt* A Git wrapper so awesome, it should be illegal + +Author: Tim Pope +License: Same terms as Vim itself (see |license|) + +This plugin is only available if 'compatible' is not set. + +INTRODUCTION *fugitive* + +Whenever you edit a file from a Git repository, a set of commands is defined +that serve as a gateway to Git. + +COMMANDS *fugitive-commands* + +These commands are local to the buffers in which they work (generally, buffers +that are part of Git repositories). + + *fugitive-:Git* +:Git [args] Run an arbitrary git command. Similar to :!git [args] + but chdir to the repository tree first. + + *fugitive-:Git!* +:Git! [args] Like |:Git|, but capture the output into a temp file, + and edit that temp file. + + *fugitive-:Gcd* +:Gcd [directory] |:cd| relative to the repository. + + *fugitive-:Glcd* +:Glcd [directory] |:lcd| relative to the repository. + + *fugitive-:Gstatus* +:Gstatus Bring up the output of git-status in the preview + window. The following maps, which work on the cursor + line file where sensible, are provided: + + g? show this help + next file + previous file + |:Gedit| + - |:Git| add + - |:Git| reset (staged files) + cA |:Gcommit| --amend --reuse-message=HEAD + ca |:Gcommit| --amend + cc |:Gcommit| + cva |:Gcommit| --amend --verbose + cvc |:Gcommit| --verbose + D |:Gdiff| + ds |:Gsdiff| + dp |:Git!| diff (p for patch; use :Gw to apply) + dp |:Git| add --intent-to-add (untracked files) + dv |:Gvdiff| + O |:Gtabedit| + o |:Gsplit| + p |:Git| add --patch + p |:Git| reset --patch (staged files) + q close status + r reload status + S |:Gvsplit| + U |:Git| checkout + U |:Git| checkout HEAD (staged files) + U |:Git| clean (untracked files) + U |:Git| rm (unmerged files) + + *fugitive-:Gcommit* +:Gcommit [args] A wrapper around git-commit. If there is nothing + to commit, |:Gstatus| is called instead. Unless the + arguments given would skip the invocation of an editor + (e.g., -m), a split window will be used to obtain a + commit message, or a new tab if -v is given. Write + and close that window (:wq or |:Gwrite|) to finish the + commit. Unlike when running the actual git-commit + command, it is possible (but unadvisable) to alter the + index with commands like git-add and git-reset while a + commit message is pending. + + *fugitive-:Gmerge* +:Gmerge [args] Calls git-merge and loads errors and conflicted files + into the quickfix list. Opens a |:Gcommit| style + split window for the commit message if the merge + succeeds. If called during a merge conflict, the + conflicted files from the current index are loaded + into the quickfix list. + + *fugitive-:Gpull* +:Gpull [args] Like |:Gmerge|, but for git-pull. + + *fugitive-:Gpush* +:Gpush [args] Invoke git-push, load the results into the quickfix + list, and invoke |:cwindow| to reveal any errors. + |:Dispatch| is used if available for asynchronous + invocation. + + *fugitive-:Gfetch* +:Gfetch [args] Like |:Gpush|, but for git-fetch. + + *fugitive-:Ggrep* +:Ggrep[!] [args] |:grep|[!] with git-grep as 'grepprg'. + + *fugitive-:Glgrep* +:Glgrep[!] [args] |:lgrep|[!] with git-grep as 'grepprg'. + + *fugitive-:Glog* +:Glog [args] Load all previous revisions of the current file into + the quickfix list. Additional git-log arguments can + be given (for example, --reverse). If "--" appears as + an argument, no file specific filtering is done, and + previous commits rather than previous file revisions + are loaded. + +:{range}Glog [args] Use git-log -L to load previous revisions of the given + range of the current file into the quickfix list. The + cursor is positioned on the first line of the first + diff hunk for each commit. + + *fugitive-:Gllog* +:Gllog [args] Like |:Glog|, but use the location list instead of the + quickfix list. + + *fugitive-:Gedit* *fugitive-:Ge* +:Gedit [revision] |:edit| a |fugitive-revision|. + + *fugitive-:Gsplit* +:Gsplit [revision] |:split| a |fugitive-revision|. + + *fugitive-:Gvsplit* +:Gvsplit [revision] |:vsplit| a |fugitive-revision|. + + *fugitive-:Gtabedit* +:Gtabedit [revision] |:tabedit| a |fugitive-revision|. + + *fugitive-:Gpedit* +:Gpedit [revision] |:pedit| a |fugitive-revision|. + +:Gsplit! [args] *fugitive-:Gsplit!* *fugitive-:Gvsplit!* +:Gvsplit! [args] *fugitive-:Gtabedit!* *fugitive-:Gpedit!* +:Gtabedit! [args] Like |:Git!|, but open the resulting temp file in a +:Gpedit! [args] split, tab, or preview window. + + *fugitive-:Gread* +:Gread [revision] Empty the buffer and |:read| a |fugitive-revision|. + When the argument is omitted, this is similar to + git-checkout on a work tree file or git-add on a stage + file, but without writing anything to disk. + +:{range}Gread [revision] + |:read| in a |fugitive-revision| after {range}. + + *fugitive-:Gread!* +:Gread! [args] Empty the buffer and |:read| the output of a Git + command. For example, :Gread! show HEAD:%. + +:{range}Gread! [args] |:read| the output of a Git command after {range}. + + *fugitive-:Gw* *fugitive-:Gwrite* +:Gwrite Write to the current file's path and stage the results. + When run in a work tree file, it is effectively git + add. Elsewhere, it is effectively git-checkout. A + great deal of effort is expended to behave sensibly + when the work tree or index version of the file is + open in another buffer. + +:Gwrite {path} You can give |:Gwrite| an explicit path of where in + the work tree to write. You can also give a path like + :0:foo.txt or even :0 to write to just that stage in + the index. + + *fugitive-:Gwq* +:Gwq [path] Like |:Gwrite| followed by |:quit| if the write + succeeded. + +:Gwq! [path] Like |:Gwrite|! followed by |:quit|! if the write + succeeded. + + *fugitive-:Gdiff* +:Gdiff [revision] Perform a |vimdiff| against the current file in the + given revision. With no argument, the version in the + index is used (which means a three-way diff during a + merge conflict, making it a git-mergetool + alternative). The newer of the two files is placed + to the right or bottom, depending on 'diffopt' and + the width of the window relative to 'textwidth'. Use + |do| and |dp| and write to the index file to simulate + "git add --patch". + + *fugitive-:Gsdiff* +:Gsdiff [revision] Like |:Gdiff|, but always split horizontally. + + *fugitive-:Gvdiff* +:Gvdiff [revision] Like |:Gdiff|, but always split vertically. + + *fugitive-:Gmove* +:Gmove {destination} Wrapper around git-mv that renames the buffer + afterward. The destination is relative to the current + directory except when started with a /, in which case + it is relative to the work tree. Add a ! to pass -f. + + *fugitive-:Gremove* +:Gremove Wrapper around git-rm that deletes the buffer + afterward. When invoked in an index file, --cached is + passed. Add a ! to pass -f and forcefully discard the + buffer. + + *fugitive-:Gblame* +:Gblame [flags] Run git-blame on the file and open the results in a + scroll bound vertical split. You can give any of + ltfnsewMC as flags and they will be passed along to + git-blame. The following maps, which work on the + cursor line commit where sensible, are provided: + + g? show this help + A resize to end of author column + C resize to end of commit column + D resize to end of date/time column + q close blame and return to blamed window + gq q, then |:Gedit| to return to work tree version + q, then open commit + o open commit in horizontal split + O open commit in new tab + - reblame at commit + ~ reblame at [count]th first grandparent + P reblame at [count]th parent (like HEAD^[count]) + +:[range]Gblame [flags] Run git-blame on the given range. + + *fugitive-:Gbrowse* +:Gbrowse Open the current file, blob, tree, commit, or tag + in your browser at the upstream hosting provider. + If a range is given, it is appropriately appended to + the URL as an anchor. + + Upstream providers can be added by installing an + appropriate Vim plugin. For example, GitHub can be + supported by installing rhubarb.vim, available at + . (Native + support for GitHub is currently included, but that is + slated to be removed.) + + The hosting provider is determined by looking at the + remote for the current or specified branch and falls + back to "origin". In the special case of a "." + remote, a local instance of git-instaweb will be + started and used. + +:Gbrowse {revision} Like :Gbrowse, but for a given |fugitive-revision|. A + useful value here is -, which ties the URL to the + latest commit rather than a volatile branch. + +:Gbrowse [...]@{remote} Force using the given remote rather than the remote + for the current branch. The remote is used to + determine which GitHub repository to link to. + +:{range}Gbrowse [args] Appends an anchor to the URL that emphasizes the + selected lines. You almost certainly want to give a + "-" argument in this case to force the URL to include + an exact revision. + +:[range]Gbrowse! [args] Like :Gbrowse, but put the URL on the clipboard rather + than opening it. + +MAPPINGS *fugitive-mappings* + +These maps are available everywhere. + + *fugitive-c_CTRL-R_CTRL-G* + On the command line, recall the path to the current + object (that is, a representation of the object + recognized by |:Gedit|). + + *fugitive-y_CTRL-G* +["x]y Yank the commit SHA and path to the current object. + +These maps are available in Git objects. + + *fugitive-* + Jump to the revision under the cursor. + + *fugitive-o* +o Jump to the revision under the cursor in a new split. + + *fugitive-S* +S Jump to the revision under the cursor in a new + vertical split. + + *fugitive-O* +O Jump to the revision under the cursor in a new tab. + + *fugitive--* +- Go to the tree containing the current tree or blob. + + *fugitive-~* +~ Go to the current file in the [count]th first + ancestor. + + *fugitive-P* +P Go to the current file in the [count]th parent. + + *fugitive-C* +C Go to the commit containing the current file. + + *fugitive-.* +. Start a |:| command line with the current revision + prepopulated at the end of the line. + + *fugitive-a* +a Show the current tag, commit, or tree in an alternate + format. + +SPECIFYING REVISIONS *fugitive-revision* + +Fugitive revisions are similar to Git revisions as defined in the "SPECIFYING +REVISIONS" section in the git-rev-parse man page. For commands that accept an +optional revision, the default is the file in the index for work tree files +and the work tree file for everything else. Example revisions follow. + +Revision Meaning ~ +HEAD .git/HEAD +master .git/refs/heads/master +HEAD^{} The commit referenced by HEAD +HEAD^ The parent of the commit referenced by HEAD +HEAD: The tree referenced by HEAD +/HEAD The file named HEAD in the work tree +Makefile The file named Makefile in the work tree +HEAD^:Makefile The file named Makefile in the parent of HEAD +:Makefile The file named Makefile in the index (writable) +- The current file in HEAD +^ The current file in the previous commit +~3 The current file 3 commits ago +: .git/index (Same as |:Gstatus|) +:0 The current file in the index +:1 The current file's common ancestor during a conflict +:2 The current file in the target branch during a conflict +:3 The current file in the merged branch during a conflict +:/foo The most recent commit with "foo" in the message + +STATUSLINE *fugitive-statusline* + + *fugitive#statusline()* +Add %{fugitive#statusline()} to your statusline to get an indicator including +the current branch and the currently edited file's commit. If you don't have +a statusline, this one matches the default when 'ruler' is set: +> + set statusline=%<%f\ %h%m%r%{fugitive#statusline()}%=%-14.(%l,%c%V%)\ %P +< + *fugitive#head(...)* +Use fugitive#head() to return the name of the current branch. If the current +HEAD is detached, fugitive#head() will return the empty string, unless the +optional argument is given, in which case the hash of the current commit will +be truncated to the given number of characters. + +ABOUT *fugitive-about* + +Grab the latest version or report a bug on GitHub: + +http://github.com/tpope/vim-fugitive + + vim:tw=78:et:ft=help:norl: -- cgit v1.2.3