From 1d25fbde2c6ab4363578e363ddb77c0f2a892356 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Karel=20Ko=C4=8D=C3=AD?= <karel.koci@nic.cz>
Date: Tue, 27 Jun 2017 17:17:31 +0200
Subject: Add pulse system profile

---
 system/etc/pulse/system.pa | 103 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 system/etc/pulse/system.pa

(limited to 'system/etc')

diff --git a/system/etc/pulse/system.pa b/system/etc/pulse/system.pa
new file mode 100644
index 0000000..38d1245
--- /dev/null
+++ b/system/etc/pulse/system.pa
@@ -0,0 +1,103 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started in system
+# mode.
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+load-module module-bluetooth-policy
+load-module module-bluetooth-discover
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
-- 
cgit v1.2.3


From 0439d2707714e1b6879818dc76e15256617a335d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Karel=20Ko=C4=8D=C3=AD?= <cynerd@email.cz>
Date: Wed, 2 Aug 2017 20:30:18 +0200
Subject: Update system install script

---
 system/etc/init.d/killi3 | 13 -------------
 1 file changed, 13 deletions(-)
 delete mode 100755 system/etc/init.d/killi3

(limited to 'system/etc')

diff --git a/system/etc/init.d/killi3 b/system/etc/init.d/killi3
deleted file mode 100755
index 1fa83aa..0000000
--- a/system/etc/init.d/killi3
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	before killprocs
-}
-
-start() {
-	for socket in `find /run/user/*/i3 -name ipc-socket*`; do
-		i3-msg -s $socket exit
-	done
-}
-- 
cgit v1.2.3